high quality ceramic watches zirconium oxide ceramics watches

This is a customer named Thomson from the United Kingdom. At the beginning of the inquiry, he has been firm on this idea and wants to make high-quality ceramic watches, because ceramics are the material with the best stiffness and the highest hardness, but because they are too hard , so it also brings the characteristics of "brittleness", which makes it not particularly used in watch applications. Bright watch consulted many ceramic manufacturers and finally found a relatively mature craft manufacturer. Since the watch the customer wants to make is in The same mold could not be found in the market. After communicating with the customer, it was decided to reopen the mold, because the general process of ceramics requires molding first, then heat treatment (sintering) until the material reaches the required density, and finally grinding. , grinding and polishing, so the production cycle took almost 2 and a half months, but luckily the final result showed a satisfactory result, the surface is moist and flawless, with a soft natural luster, and the color is crystal clear.